Altera Stratix V Avalon-ST User Manual
Page 53
Signal
Direction
Description
app_msix_addr[63:0]
Input
The Application Layer drives the address for the MSI-X posted
write TLP on this input. Driven in the same cycle as
app_msix_
req
.
app_msix_data[31:0]
Input
The Application Layer drives
app_msix_data[31:0]
for the
MSI-X posted write TLP. Driven in the same cycle as
app_msix_
req
.
app_msix_enable_
pf[1:0]
Output
The MSI-X Enable bit of PF0 and PF1 MSI-X Control Register
drive this output.
app_msix_enable_
vf[
Output
The MSI-X Enable bit of the MSI-X Control Register for VF0
drives bit[0]. The MSI-X Enable bit of the MSI-X Control
Register for VF1 drives bit[1], and so on.
app_msix_err
Output
Indicates an error during the execution of an MSI-X request.
Valid when
app_msix_ack
is asserted. The following encodings
are defined:
• 1b'0: MSI-X message sent
• 1b'1: Error detected during execution of the MSI-X request.
No message sent. The following errors may occur:
• The function number is invalid
• The MSI-X Enable bit for the function was not set
• The MSI-X Function Mask was not set
app_msix_fn_mask_
pf[1:0]
Output
The MSI-X Function Mask bit of PF0 and PF1 MSI-X Control
Register drive this output.
app_msix_fn_mask_
vf[
Output
The MSI-X Function Mask bit of the MSI-X Control Register for
VF0 drives bit[0]. The MSI-X Function Mask bit of the MSI-X
Control Register for VF1 drives bit[1], and so on.
total number of VFs for both PF0 and PF1.
4-18
Interrupt Interface
UG-01097_sriov
2014.12.15
Altera Corporation
Interfaces and Signal Descriptions