Top-level interfaces, Clocks and reset, Transceiver reconfiguration – Altera Stratix V Avalon-ST User Manual
Page 126
Table 9-1: Application Layer Clock Frequencies
Lanes
Gen1
Gen2
Gen3
×2
N/A
N/A
125 MHz @ 128 bits
×4
N/A
125 MHz @ 128 bits
250 MHz @ 128 bits or
125 MHz @ 256 bits
×8
125 MHz @ 128 bits
250 MHz @ 128 bits or
125 MHz @ 256 bits
250 MHz @ 256 bits
Related Information
Top-Level Interfaces
Clocks and Reset
The PCI Express Base Specification requires an input reference clock, which is called
refclk
in this design.
The PCI Express Base Specification stipulates that the frequency of this clock be 100 MHz.
The PCI Express Base Specification also requires a system configuration time of 100 ms. To meet this
specification, IP core includes an embedded hard reset controller. This reset controller exits the reset state
after the I/O ring of the device is initialized.
Related Information
Reset, Status, and Link Training Signals
Transceiver Reconfiguration
The transceiver reconfiguration interface allows you to dynamically reconfigure the values of analog
settings in the PMA block of the transceiver. Dynamic reconfiguration is necessary to compensate for
process variations.
Related Information
Transceiver PHY IP Reconfiguration
on page 11-1
9-2
Top-Level Interfaces
UG-01097_sriov
2014.12.15
Altera Corporation
IP Core Architecture