Altera SerialLite II IP Core - Manual (Page 108)

January 2014 Altera Corporation SerialLite II MegaCore Function
User Guide
Additional Information
This chapter provides additional information about the document and Altera.
Document Revision History
The following table lists the revision history for this document.
How to Contact Altera
To locate the most up-to-date information about Altera products, refer to the
following table.
Date Version Changes
January 2014 13.1
■ Removed information about Arria GX, HardCopy IV, Stratix GX, and Stratix II GX devices.
Altera no longer supports these devices.
■ Added Cyclone V device support.
■ Updated data rate information in Table 3–2 and Table 4–2 .
July 2012 12.0
■ Added Arria V and Stratix V device support.
■ Added information about MegaCore configuration for Arria V and Stratix V devices.
February 2011 10.1
■ Updated Arria II GX and Stratix IV device support information.
■ Added information about FIFO threshold settings.
July 2010 10.0 Updated Stratix IV device support information.
November 2009 9.1
■ Added HardCopy IV GX device support.
■ Added timing diagrams in Initialization and Restart, and Atlantic Interface sections.
March 2009 9.0 Added Arria II GX device support.
November 2008 8.1
Added requirement to configure a dynamic reconfiguration block with Stratix IV transceivers,
to enable offset equalization.
May 2008 8.0
■ Added additional ALT2GXB parameters - V
CCH
, Reference Input Clk Frequency and
Reconfiguration Channel Number.
■ Added Stratix IV device support.
October 2007 7.2.0
■ Added gxb_powerdown signal to ease merging of multiple SerialLite II cores into the same
transceiver block.
■ Added VHDL testbench for some configurations.
■ Moved the ALT2GXB megafunction instantiation into a separate file to ease post-
generation changes.
Contact (1) Contact Method Address
Technical support Website www.altera.com/support
Technical training
Website www.altera.com/training
Email [email protected]
Product literature Website www.altera.com/literature