Setting display contrast, Choosing video mode – EXFO PM-1600 High-Speed Power Meter User Manual
Page 94
Customizing the PM-1600 Display
84
PM-1600
Setting Display Contrast
Setting Display Contrast
To set the contrast,
1. Press Setup to access the Setup menu.
2. Press ENTER to access the System Setup menu.
3. Use the up/down or left/right arrow keys to select Contrast.
4. Press ENTER to access the contrast edit box.
5. Use the up/down arrow keys to adjust the contrast as required.
6. Confirm the contrast adjustment by pressing ENTER.
Note: You can adjust the display contrast from within the power measurement
mode by pressing Shift, then the up/down arrow keys. To confirm the
contrast adjustment, press Shift again.
Choosing Video Mode
To set the video mode,
1. Press Setup to access the Setup menu.
2. Press ENTER to access the System Setup menu.
3. Use the up/down or left/right arrow keys to select Video Mode.
4. Press ENTER to access the video mode edit box.
5. Use the up/down arrow keys to set the required video mode.
Customizing the PM-1600 Display
84
PM-1600
Setting Display Contrast
Setting Display Contrast
To set the contrast,
1. Press Setup to access the Setup menu.
2. Press ENTER to access the System Setup menu.
3. Use the up/down or left/right arrow keys to select Contrast.
4. Press ENTER to access the contrast edit box.
5. Use the up/down arrow keys to adjust the contrast as required.
6. Confirm the contrast adjustment by pressing ENTER.
Note: You can adjust the display contrast from within the power measurement
mode by pressing Shift, then the up/down arrow keys. To confirm the
contrast adjustment, press Shift again.
Choosing Video Mode
To set the video mode,
1. Press Setup to access the Setup menu.
2. Press ENTER to access the System Setup menu.
3. Use the up/down or left/right arrow keys to select Video Mode.
4. Press ENTER to access the video mode edit box.
5. Use the up/down arrow keys to set the required video mode.