Recalling manually stored power measurements – EXFO PM-1600 High-Speed Power Meter User Manual
Page 52
Storing and Recalling Power Measurements
42
PM-1600
Recalling Manually Stored Power Measurements
Recalling Manually Stored Power
Measurements
The power measurements that you stored manually (see Storing Power
Measurements Manually on page 41) can be recalled one register at a time.
To retrieve a manually stored power measurement,
1. Press Recall. The display either indicates the number of stored power
measurements or a message stating whether the memory is empty or
full.
2. Press ENTER. A stored power measurement is displayed with the
matching register number.
3. Use the up/down arrow keys to select the required register.
Note: You can keep the up/down arrow keys pressed to quickly scan the power
measurements in adjacent registers. To speed up the scan, use the left/right
arrow keys.
4. To exit the Recall menu, press Recall, or select Exit then press Enter.
When recalling a stored power measurement, it is possible to change the
display mode (on both channels when using a PM-1620) and the
measurement unit.
View Stored Data (27 values)
Erase Stored Data
Exit
Storing and Recalling Power Measurements
42
PM-1600
Recalling Manually Stored Power Measurements
Recalling Manually Stored Power
Measurements
The power measurements that you stored manually (see Storing Power
Measurements Manually on page 41) can be recalled one register at a time.
To retrieve a manually stored power measurement,
1. Press Recall. The display either indicates the number of stored power
measurements or a message stating whether the memory is empty or
full.
2. Press ENTER. A stored power measurement is displayed with the
matching register number.
3. Use the up/down arrow keys to select the required register.
Note: You can keep the up/down arrow keys pressed to quickly scan the power
measurements in adjacent registers. To speed up the scan, use the left/right
arrow keys.
4. To exit the Recall menu, press Recall, or select Exit then press Enter.
When recalling a stored power measurement, it is possible to change the
display mode (on both channels when using a PM-1620) and the
measurement unit.
View Stored Data (27 values)
Erase Stored Data
Exit