EXFO PM-1600 High-Speed Power Meter - Manual (Page 134)

Remote Control (SCPI) Commands
124 PM-1600
Specific Commands
SENSe:AVERage:COUNt
Description This command sets the number of power measurements that
will be used to compute data averaging. If this command is sent
while an acquisition is in progress, the “Acquisition already
running” error message will be raised.
Syntax SENS:AVER:COUN
Parameters The parameter is the number of power measurements
to be used to compute data averaging in the “999” format.
Example SENS:AVER:COUN 12
See also SENS:AVER:COUN?, SENS:AVER:STAT, and SENS:AVER:STAT?
SENSe:AVERage:COUNt?
Description This query returns the number of power measurements used to
compute data averaging.
Syntax SENS:AVER:COUN?
Response The number of power measurements used to compute data
averaging in the “999” format.
Example SENS:AVER:COUN?
See also SENS:AVER:COUN, SENS:AVER:STAT, and SENS:AVER:STAT?
Remote Control (SCPI) Commands
124 PM-1600
Specific Commands
SENSe:AVERage:COUNt
Description This command sets the number of power measurements that
will be used to compute data averaging. If this command is sent
while an acquisition is in progress, the “Acquisition already
running” error message will be raised.
Syntax SENS:AVER:COUN
Parameters The parameter is the number of power measurements
to be used to compute data averaging in the “999” format.
Example SENS:AVER:COUN 12
See also SENS:AVER:COUN?, SENS:AVER:STAT, and SENS:AVER:STAT?
SENSe:AVERage:COUNt?
Description This query returns the number of power measurements used to
compute data averaging.
Syntax SENS:AVER:COUN?
Response The number of power measurements used to compute data
averaging in the “999” format.
Example SENS:AVER:COUN?
See also SENS:AVER:COUN, SENS:AVER:STAT, and SENS:AVER:STAT?