EXFO PM-1600 High-Speed Power Meter - Manual (Page 132)

Remote Control (SCPI) Commands
122 PM-1600
Specific Commands
INITiate[:IMMediate]
Description This command stores a power measurement value (for both
channels when using a PM-1620).
Syntax INIT[:IMM]
Example INIT:IMM
See also FETC[:SCAL]:POW:DC? and READ[:SCAL]:POW:DC?
INST:NSELect
Description This command selects a power meter channel (when using a
PM-1620). Until a new channel is selected, any subsequent
commands will be directed to this channel. An error message
appears if the command is sent to a PM-1610.
Syntax INST:NSEL
Parameters The parameter can be 1 or 2.
Example INST:NSEL 2
INST:NSELect?
Description This query returns the currently selected power meter channel
(when using a PM-1620).
Syntax INST:NSEL?
Response A numeric value: 1 or 2.
Example INST:NSEL?
Remote Control (SCPI) Commands
122 PM-1600
Specific Commands
INITiate[:IMMediate]
Description This command stores a power measurement value (for both
channels when using a PM-1620).
Syntax INIT[:IMM]
Example INIT:IMM
See also FETC[:SCAL]:POW:DC? and READ[:SCAL]:POW:DC?
INST:NSELect
Description This command selects a power meter channel (when using a
PM-1620). Until a new channel is selected, any subsequent
commands will be directed to this channel. An error message
appears if the command is sent to a PM-1610.
Syntax INST:NSEL
Parameters The parameter can be 1 or 2.
Example INST:NSEL 2
INST:NSELect?
Description This query returns the currently selected power meter channel
(when using a PM-1620).
Syntax INST:NSEL?
Response A numeric value: 1 or 2.
Example INST:NSEL?