EXFO PM-1600 High-Speed Power Meter - Manual (Page 155)

Remote Control (SCPI) Commands
High-Speed Power Meter 145
Specific Commands
TRIGger:SEQuence:SOURce?
Description This query returns the source of the trigger condition.
Syntax TRIG:SEQ:SOUR?
Response “EXTERNAL”-external trigger
“INTERNAL1”-channel 1
“INTERNAL2”-channel 2 (PM-1620)
Example TRIG:SEQ:SOUR?
See also TRIG:SEQ:LEV, TRIG:SEQ:LEV?, TRIG:SEQ:SLOP,
TRIG:SEQ:SLOP?, TRIG:SEQ:SOUR, TRIG:SEQ:STAT, and
TRIG:SEQ:STAT?
TRIGger:SEQuence:STATe
Description This command sets the state of the trigger condition.
Syntax TRIG:SEQ:STAT
Parameters The parameter represents the status of the trigger
condition:
“0”-deactivate trigger condition
“1”-activate trigger condition
Example TRIG:SEQ:STAT 0
See also TRIG:SEQ:LEV, TRIG:SEQ:LEV?, TRIG:SEQ:SLOP,
TRIG:SEQ:SLOP?, TRIG:SEQ:SOUR, TRIG:SEQ:SOUR?, and
TRIG:SEQ:STAT?
Remote Control (SCPI) Commands
High-Speed Power Meter 145
Specific Commands
TRIGger:SEQuence:SOURce?
Description This query returns the source of the trigger condition.
Syntax TRIG:SEQ:SOUR?
Response “EXTERNAL”-external trigger
“INTERNAL1”-channel 1
“INTERNAL2”-channel 2 (PM-1620)
Example TRIG:SEQ:SOUR?
See also TRIG:SEQ:LEV, TRIG:SEQ:LEV?, TRIG:SEQ:SLOP,
TRIG:SEQ:SLOP?, TRIG:SEQ:SOUR, TRIG:SEQ:STAT, and
TRIG:SEQ:STAT?
TRIGger:SEQuence:STATe
Description This command sets the state of the trigger condition.
Syntax TRIG:SEQ:STAT
Parameters The parameter represents the status of the trigger
condition:
“0”-deactivate trigger condition
“1”-activate trigger condition
Example TRIG:SEQ:STAT 0
See also TRIG:SEQ:LEV, TRIG:SEQ:LEV?, TRIG:SEQ:SLOP,
TRIG:SEQ:SLOP?, TRIG:SEQ:SOUR, TRIG:SEQ:SOUR?, and
TRIG:SEQ:STAT?