EXFO PM-1600 High-Speed Power Meter - Manual (Page 38)

Acquiring Power Measurements
28 PM-1600
Managing the Wavelength List
To modify a wavelength,
1. Follow steps 1 to 4 in section on viewing the wavelength list on
page 25. Select the wavelength to be modified by pressing ENTER.
2. Use the up/down arrow keys to select
λ
.
3. Press ENTER.
4. Use the left/right arrow keys to select the flashing digit of the
wavelength and the up/down keys to increase or decrease the flashing
digit. You can enter a value with a 0.01 nm resolution.
Note: The mark in the wavelength edit box indicates that the wavelength is on
the wavelength list. This mark may disappear as you modify the value in
the wavelength edit box.
5. Confirm by pressing ENTER.
Acquiring Power Measurements
28 PM-1600
Managing the Wavelength List
To modify a wavelength,
1. Follow steps 1 to 4 in section on viewing the wavelength list on
page 25. Select the wavelength to be modified by pressing ENTER.
2. Use the up/down arrow keys to select
λ
.
3. Press ENTER.
4. Use the left/right arrow keys to select the flashing digit of the
wavelength and the up/down keys to increase or decrease the flashing
digit. You can enter a value with a 0.01 nm resolution.
Note: The mark in the wavelength edit box indicates that the wavelength is on
the wavelength list. This mark may disappear as you modify the value in
the wavelength edit box.
5. Confirm by pressing ENTER.