Pm-1600, Performing typical tests with your pm-1600, Performing absolute power measurements – EXFO PM-1600 High-Speed Power Meter User Manual
Page 66

Performing Typical Tests with Your PM-1600
56
PM-1600
Performing Absolute Power Measurements
Performing Absolute Power Measurements
Absolute power measurements are necessary when performing system or
component monitoring, quality control, system, or component acceptance
and troubleshooting.
To perform an absolute optical power measurement,
1. Perform an offset nulling.
2. Using an appropriate test jumper and connector adapter, connect the
DUT to the detector port.
3. Adjust the power meter to the correct wavelength, +0.000 dB or
1.0000 W/W correction factor, and set the display unit to dBm or W.
4. The absolute optical power can now be monitored and recorded.
Note: Using a PM-1620, absolute power can be simultaneously measured for
each independent channel. Simply apply each step of the above procedure
to all used channels.
HIGH-SPEED POWER METER
PM-1600
dB W/W
ENTER
dBm/W
Ref
Null
Chan
Range
λ
Avg
Shift
Store
Recall
Program
Setup
Analog Out
C1
C2
Ext. Trig
Display
PM-1600
DUT
Performing Typical Tests with Your PM-1600
56
PM-1600
Performing Absolute Power Measurements
Performing Absolute Power Measurements
Absolute power measurements are necessary when performing system or
component monitoring, quality control, system, or component acceptance
and troubleshooting.
To perform an absolute optical power measurement,
1. Perform an offset nulling.
2. Using an appropriate test jumper and connector adapter, connect the
DUT to the detector port.
3. Adjust the power meter to the correct wavelength, +0.000 dB or
1.0000 W/W correction factor, and set the display unit to dBm or W.
4. The absolute optical power can now be monitored and recorded.
Note: Using a PM-1620, absolute power can be simultaneously measured for
each independent channel. Simply apply each step of the above procedure
to all used channels.
HIGH-SPEED POWER METER
PM-1600
dB W/W
ENTER
dBm/W
Ref
Null
Chan
Range
λ
Avg
Shift
Store
Recall
Program
Setup
Analog Out
C1
C2
Ext. Trig
Display
PM-1600
DUT