EXFO PM-1600 High-Speed Power Meter - Manual (Page 108)

Maintenance
98 PM-1600
Software Upgrade
To perform a software upgrade,
1. Turn off the PM-1600.
2. Connect one end of a null modem cable to the PM-1600 RS-232 serial
port and the other end to an unused communication port on your
computer (ex. COM2).
3. Insert the upgrade diskette into the computer diskette drive.
4. Create a new directory on the computer hard drive, then copy the
contents of the diskette into the new directory.
5. Execute the “lo0006.exe” file to start the software upgrade.
6. Highlight the “SELECT COM PORT” command, then press Enter.
7. Select the COM port to which the null modem cable is connected on
your computer, then press Enter.
8. Highlight the “PROGRAM DEVICE FLASH” command, then press Enter.
Maintenance
98 PM-1600
Software Upgrade
To perform a software upgrade,
1. Turn off the PM-1600.
2. Connect one end of a null modem cable to the PM-1600 RS-232 serial
port and the other end to an unused communication port on your
computer (ex. COM2).
3. Insert the upgrade diskette into the computer diskette drive.
4. Create a new directory on the computer hard drive, then copy the
contents of the diskette into the new directory.
5. Execute the “lo0006.exe” file to start the software upgrade.
6. Highlight the “SELECT COM PORT” command, then press Enter.
7. Select the COM port to which the null modem cable is connected on
your computer, then press Enter.
8. Highlight the “PROGRAM DEVICE FLASH” command, then press Enter.