EXFO PM-1600 High-Speed Power Meter - Manual (Page 92)

Controlling the PM-1600 Automatically or Remotely
82 PM-1600
PM-1600 Error Messages
PM-1600 Error Messages
Error
Number
Description Probable Cause
1602 “Invalid channel” The specified channel number is invalid.
1603 “Light on detector” A nulling command has been attempted
with light reaching the detector.
1604 “Invalid parameter” The high-speed power meter has
received a data parameter that it was not
expecting.
1605 “Parameter out of range” The high-speed power meter has
received a data parameter outside the
valid range.
1606 “Acquisition already running” A command was sent while an
acquisition was in progress.
1607 “Acquisition not running” A command to stop an acquisition was
sent with no acquisition in progress.
1612 “Invalid unit” The specified unit is not valid.
1615 “Invalid sampling rate” The selected sampling rate is not
compatible with the current acquisition
mode (continuous or single).
1616 “Module timeout on nulling” The nulling process could not be
performed.
1617 “Automatic range cannot be used
for programmed acquisition”
A manual range must be selected for a
programmed acquisition.
1618 “Command not processed:
internal error”
An internal error caused the command to
fail.
1619 “Segment not allowed” No data in the segment.
1620 “No data logged” No data was logged.
Controlling the PM-1600 Automatically or Remotely
82 PM-1600
PM-1600 Error Messages
PM-1600 Error Messages
Error
Number
Description Probable Cause
1602 “Invalid channel” The specified channel number is invalid.
1603 “Light on detector” A nulling command has been attempted
with light reaching the detector.
1604 “Invalid parameter” The high-speed power meter has
received a data parameter that it was not
expecting.
1605 “Parameter out of range” The high-speed power meter has
received a data parameter outside the
valid range.
1606 “Acquisition already running” A command was sent while an
acquisition was in progress.
1607 “Acquisition not running” A command to stop an acquisition was
sent with no acquisition in progress.
1612 “Invalid unit” The specified unit is not valid.
1615 “Invalid sampling rate” The selected sampling rate is not
compatible with the current acquisition
mode (continuous or single).
1616 “Module timeout on nulling” The nulling process could not be
performed.
1617 “Automatic range cannot be used
for programmed acquisition”
A manual range must be selected for a
programmed acquisition.
1618 “Command not processed:
internal error”
An internal error caused the command to
fail.
1619 “Segment not allowed” No data in the segment.
1620 “No data logged” No data was logged.