Trigger:sequence:slope, Trigger:sequence:source – EXFO PM-1600 High-Speed Power Meter User Manual
Page 154
Remote Control (SCPI) Commands
144
PM-1600
Specific Commands
TRIGger:SEQuence:SLOPe?
Description This query returns the rising or falling edge status of the trigger
condition, i.e., whether positive or negative TTL voltage
transitions will trigger the acquisition.
Syntax
TRIG:SEQ:SLOP?
Response
“POSITIVE”-rising-edge trigger
“NEGATIVE”-falling-edge trigger
Example
TRIG:SEQ:SLOP?
See also
TRIG:SEQ:LEV, TRIG:SEQ:LEV?, TRIG:SEQ:SLOP,
TRIG:SEQ:SOUR, TRIG:SEQ:SOUR?, TRIG:SEQ:STAT, and
TRIG:SEQ:STAT?
TRIGger:SEQuence:SOURce
Description This command sets the source of the trigger condition. If this
command is sent while an acquisition is in progress, the
“Acquisition already running” error message will be raised.
Syntax
TRIG:SEQ:SOUR
Parameters “EXTERNAL”-external trigger
“INTERNAL1”-channel 1
“INTERNAL2”-channel 2 (PM-1620)
Example
TRIG:SEQ:SOUR EXTERNAL
See also
TRIG:SEQ:LEV, TRIG:SEQ:LEV?, TRIG:SEQ:SLOP,
TRIG:SEQ:SLOP?, TRIG:SEQ:SOUR, TRIG:SEQ:SOUR?,
TRIG:SEQ:STAT, and TRIG:SEQ:STAT?
Remote Control (SCPI) Commands
144
PM-1600
Specific Commands
TRIGger:SEQuence:SLOPe?
Description This query returns the rising or falling edge status of the trigger
condition, i.e., whether positive or negative TTL voltage
transitions will trigger the acquisition.
Syntax
TRIG:SEQ:SLOP?
Response
“POSITIVE”-rising-edge trigger
“NEGATIVE”-falling-edge trigger
Example
TRIG:SEQ:SLOP?
See also
TRIG:SEQ:LEV, TRIG:SEQ:LEV?, TRIG:SEQ:SLOP,
TRIG:SEQ:SOUR, TRIG:SEQ:SOUR?, TRIG:SEQ:STAT, and
TRIG:SEQ:STAT?
TRIGger:SEQuence:SOURce
Description This command sets the source of the trigger condition. If this
command is sent while an acquisition is in progress, the
“Acquisition already running” error message will be raised.
Syntax
TRIG:SEQ:SOUR
Parameters “EXTERNAL”-external trigger
“INTERNAL1”-channel 1
“INTERNAL2”-channel 2 (PM-1620)
Example
TRIG:SEQ:SOUR EXTERNAL
See also
TRIG:SEQ:LEV, TRIG:SEQ:LEV?, TRIG:SEQ:SLOP,
TRIG:SEQ:SLOP?, TRIG:SEQ:SOUR, TRIG:SEQ:SOUR?,
TRIG:SEQ:STAT, and TRIG:SEQ:STAT?