EXFO PM-1600 High-Speed Power Meter - Manual (Page 39)

Acquiring Power Measurements
High-Speed Power Meter 29
Managing the Wavelength List
To delete a specific wavelength from the list,
1. Follow steps 1 to 4 in section on viewing the wavelength list on
page 25. Select the wavelength to be deleted by pressing ENTER.
Note: You can also select the wavelength while in the Wavelength List & Corr.
Factor menu by pressing
λ
.
2. With the wavelength to be deleted displayed in the wavelength edit
box, use the up/down arrow keys to select
λ
.
3. Use the left/right arrow keys to select Del
λ
.
4. Confirm the wavelength deletion by pressing ENTER.
To remove all the wavelengths from the list,
1. Press Setup to access the Setup menu.
2. Use the up/down arrow keys to select Wavelength List & Corr. Factor.
3. Press ENTER.
4. Use the left/right arrow keys to select Del All.
5. Confirm the wavelength list deletion by pressing ENTER.
Acquiring Power Measurements
High-Speed Power Meter 29
Managing the Wavelength List
To delete a specific wavelength from the list,
1. Follow steps 1 to 4 in section on viewing the wavelength list on
page 25. Select the wavelength to be deleted by pressing ENTER.
Note: You can also select the wavelength while in the Wavelength List & Corr.
Factor menu by pressing
λ
.
2. With the wavelength to be deleted displayed in the wavelength edit
box, use the up/down arrow keys to select
λ
.
3. Use the left/right arrow keys to select Del
λ
.
4. Confirm the wavelength deletion by pressing ENTER.
To remove all the wavelengths from the list,
1. Press Setup to access the Setup menu.
2. Use the up/down arrow keys to select Wavelength List & Corr. Factor.
3. Press ENTER.
4. Use the left/right arrow keys to select Del All.
5. Confirm the wavelength list deletion by pressing ENTER.