Setting refresh rate – EXFO PM-1600 High-Speed Power Meter User Manual

Page 44

Acquiring Power Measurements

PM-1600

Setting Refresh Rate

Setting Refresh Rate

This function allows you to define the refresh rate of the power readings in
power measurement mode (for both channels in a PM-1620 dual-channel
power meter).

To set the refresh rate,
1. Press Setup to access the Setup menu.

2. Press ENTER to access the System Setup menu.

3. Use the up/down arrow keys to select Refresh Rate. The current

refresh rate is displayed.

4. Press ENTER to access the refresh rate edit box.

5. Use the up/down arrow keys to set the refresh rate between 1/2 Hz,

1 Hz, 2 Hz, 4 Hz, 8 Hz, and 16 Hz.

6. Press ENTER to confirm the new refresh rate.

Exit

Sampling Rte

Refresh Rate

Backlight
Contrast

Video Mode

256Hz

16Hz

STD

RS232 / GPIB

GPIB Addr.

Save
Recall

GPIB

# 3
# 3