EXFO PM-1600 High-Speed Power Meter - Manual (Page 119)

High-Speed Power Meter 109
A Technical Specifications
I
MPORTANT
The technical specifications for this product can change without
notice. The information presented in this section is provided as a
reference only. To obtain this product’s most recent technical
specifications, visit the EXFO Web site at www.exfo.com.
Specifications 1 Orderin
Model PM-1613/1623 PM-1613W/1623W
Number of detectors 1/2 1/2
Detector type InGaAs InGaAs
Detector size (mm) 1 3
Wavelength range (nm) 800 to 1700 800 to 1700
Power range 2 (dBm) 9 to −80 8 to −70
Uncertainty 3 (%) ± 5 ± 5
(0 to −55 dBm) (0 to −50 dBm)
Linearity 4 (dB) ± 0.015 ± 0.015
(0 to −55 dBm) (0 to −50 dBm)
Noise (peak-to-peak) 5 (pW) 3 20
Power resolution (dB) 0.001 (9 to −40 dBm) 0.001 (8 to −40 dBm)
Wavelength resolution (nm) 0.01 0.01
Stabilization time (ms)
automatic range 12 (9 to −85 dBm) 6 (8 to −75 dBm)
automatic range 3 (9 to −49 dBm) 3 (8 to −49 dBm)
fixed range (1 to 4) 1 1
Sampling rate (sample/s/channel)
fast acquisition mode up to 4096 up to 4096
continuous measurement mode up to 256 up to 256
Fiber type (µm) 5/125 to 62.5/125 5/125 to 62.5/125
Analog output bandwidth 6 (Hz) (ranges 1 to 6) 700 k; 700 k; 30 k; 30 k; 50 k; 7.5 k; 5 k; 7 k;
150; 150; typical1 k; 1 k; typical
output voltage (V) between 0 and 2.15, typical between 0 and 2.15, typical
output impedance ( Ω) 640 640
General Specifications
External trigger input voltage (V) 0 to 5 (TTL)
Size (H x W x D) 11.7 cm x 22.2 cm x 33.3 cm (4 5 / 8 in x 8 3 / 4 in x 13 1 / 8 in)
Weight 2.8 kg (6.2 lb)
Temperature operating 0 °C to 40 °C (32 °F to 104 °F)
storage −35 °C to 70 °C ( −31 °F to 158 °F)
Relative humidity 7 0 to 80 % non-condensing Standard
Instruction m
Certificate of
Certificate of
AC power co
MT-RJ Co
Connector ad
singlemode f
be ordered se
guaranteed w
PM-1600 Hig
Number of cha
1 = One chann
2 = Two chann
Detector code
3 = InGaAs
3W = InGaAs w
Specify the mo
adapter you w
Connector ada
FOA-2
16 = S
FOA-2 22 = F
F
FOA-2 28 = D
D
FOA-2 32 = S
FOA-2 40 = D
lo
FOA-2 54 = S
(/
FOA-2 76 = F
lo
FOA-2 84 = D
FOA-2 96 = E
FOA-2 98 = L
FOA-2 99 = M
FOA- 8100 = U
Notes
1. All specifications are measured at 1310 nm (unless otherwise specified) with an FC/non-angled connector and a warmup
time of 20 minutes (30 minutes for PM-16X3W), followed by an offset nulling.
2. From 18 °C to 32 °C
3. Measured at 23 °C ± 1 °C with FOA-222 between 1000 and 1640 nm. Add 1 % to uncertainty below 1000 nm and 6 %
over 1640 nm. All uncertainties are valid on the day of calibration.
4. Averaged measurement at constant temperature in 0 to 40 °C range.
5. Averaging time 0.25 s, observation time 50 s at 23 °C ± 1 °C, from 1200 nm to 1640 nm.
6. Bandwidth corresponds to each electrical scale from the lowest to the highest gain.
7. Measured in 0 °C to 40 °C range.
High-Speed Power Meter 109
A Technical Specifications
I
MPORTANT
The technical specifications for this product can change without
notice. The information presented in this section is provided as a
reference only. To obtain this product’s most recent technical
specifications, visit the EXFO Web site at www.exfo.com.
Specifications 1 Orderin
Model PM-1613/1623 PM-1613W/1623W
Number of detectors 1/2 1/2
Detector type InGaAs InGaAs
Detector size (mm) 1 3
Wavelength range (nm) 800 to 1700 800 to 1700
Power range 2 (dBm) 9 to −80 8 to −70
Uncertainty 3 (%) ± 5 ± 5
(0 to −55 dBm) (0 to −50 dBm)
Linearity 4 (dB) ± 0.015 ± 0.015
(0 to −55 dBm) (0 to −50 dBm)
Noise (peak-to-peak) 5 (pW) 3 20
Power resolution (dB) 0.001 (9 to −40 dBm) 0.001 (8 to −40 dBm)
Wavelength resolution (nm) 0.01 0.01
Stabilization time (ms)
automatic range 12 (9 to −85 dBm) 6 (8 to −75 dBm)
automatic range 3 (9 to −49 dBm) 3 (8 to −49 dBm)
fixed range (1 to 4) 1 1
Sampling rate (sample/s/channel)
fast acquisition mode up to 4096 up to 4096
continuous measurement mode up to 256 up to 256
Fiber type (µm) 5/125 to 62.5/125 5/125 to 62.5/125
Analog output bandwidth 6 (Hz) (ranges 1 to 6) 700 k; 700 k; 30 k; 30 k; 50 k; 7.5 k; 5 k; 7 k;
150; 150; typical1 k; 1 k; typical
output voltage (V) between 0 and 2.15, typical between 0 and 2.15, typical
output impedance ( Ω) 640 640
General Specifications
External trigger input voltage (V) 0 to 5 (TTL)
Size (H x W x D) 11.7 cm x 22.2 cm x 33.3 cm (4 5 / 8 in x 8 3 / 4 in x 13 1 / 8 in)
Weight 2.8 kg (6.2 lb)
Temperature operating 0 °C to 40 °C (32 °F to 104 °F)
storage −35 °C to 70 °C ( −31 °F to 158 °F)
Relative humidity 7 0 to 80 % non-condensing Standard
Instruction m
Certificate of
Certificate of
AC power co
MT-RJ Co
Connector ad
singlemode f
be ordered se
guaranteed w
PM-1600 Hig
Number of cha
1 = One chann
2 = Two chann
Detector code
3 = InGaAs
3W = InGaAs w
Specify the mo
adapter you w
Connector ada
FOA-2
16 = S
FOA-2 22 = F
F
FOA-2 28 = D
D
FOA-2 32 = S
FOA-2 40 = D
lo
FOA-2 54 = S
(/
FOA-2 76 = F
lo
FOA-2 84 = D
FOA-2 96 = E
FOA-2 98 = L
FOA-2 99 = M
FOA- 8100 = U
Notes
1. All specifications are measured at 1310 nm (unless otherwise specified) with an FC/non-angled connector and a warmup
time of 20 minutes (30 minutes for PM-16X3W), followed by an offset nulling.
2. From 18 °C to 32 °C
3. Measured at 23 °C ± 1 °C with FOA-222 between 1000 and 1640 nm. Add 1 % to uncertainty below 1000 nm and 6 %
over 1640 nm. All uncertainties are valid on the day of calibration.
4. Averaged measurement at constant temperature in 0 to 40 °C range.
5. Averaging time 0.25 s, observation time 50 s at 23 °C ± 1 °C, from 1200 nm to 1640 nm.
6. Bandwidth corresponds to each electrical scale from the lowest to the highest gain.
7. Measured in 0 °C to 40 °C range.