Sense:frequency:ncontinuous – EXFO PM-1600 High-Speed Power Meter User Manual
Page 140
Remote Control (SCPI) Commands
130
PM-1600
Specific Commands
SENSe:FREQuency:NCONtinuous
Description This command sets the sampling rate in program mode, i.e., a
high sampling rate. If this command is sent while an acquisition
is in progress, the “Acquisition already running” error message
will be raised.
Syntax
SENS:FREQ:NCON
Parameters The
program mode in the “9999.999” format: 512/s, 1024/s, 2048/s,
and 4096/s.
If an invalid parameter is entered, the “Data type error”
message appears.
Example
SENS:FREQ:NCON 512
See also
SENS:FREQ[:CONT], SENS:FREQ:CONT?,
SENS:FREQ:CONT:CATA?, SENS:FREQ:NCON?, and
SENS:FREQ:NCON:CATA?
SENSe:FREQuency:NCONtinuous?
Description This query returns the current sampling rate in program mode.
Syntax
SENS:FREQ:NCON?
Response
The current sampling rate in program mode in the “9999.999”
format.
Example
SENS:FREQ:NCON?
See also
SENS:FREQ[:CONT], SENS:FREQ:CONT?,
SENS:FREQ:CONT:CATA?, SENS:FREQ:NCON, and
SENS:FREQ:NCON:CATA?
Remote Control (SCPI) Commands
130
PM-1600
Specific Commands
SENSe:FREQuency:NCONtinuous
Description This command sets the sampling rate in program mode, i.e., a
high sampling rate. If this command is sent while an acquisition
is in progress, the “Acquisition already running” error message
will be raised.
Syntax
SENS:FREQ:NCON
Parameters The
program mode in the “9999.999” format: 512/s, 1024/s, 2048/s,
and 4096/s.
If an invalid parameter is entered, the “Data type error”
message appears.
Example
SENS:FREQ:NCON 512
See also
SENS:FREQ[:CONT], SENS:FREQ:CONT?,
SENS:FREQ:CONT:CATA?, SENS:FREQ:NCON?, and
SENS:FREQ:NCON:CATA?
SENSe:FREQuency:NCONtinuous?
Description This query returns the current sampling rate in program mode.
Syntax
SENS:FREQ:NCON?
Response
The current sampling rate in program mode in the “9999.999”
format.
Example
SENS:FREQ:NCON?
See also
SENS:FREQ[:CONT], SENS:FREQ:CONT?,
SENS:FREQ:CONT:CATA?, SENS:FREQ:NCON, and
SENS:FREQ:NCON:CATA?