EXFO PM-1600 High-Speed Power Meter - Manual (Page 105)

Maintenance
High-Speed Power Meter 95
Cleaning the Analog Output and External Trigger Ports
5. While applying light pressure, gently rotate the cleaning tip on the
detector window.
6. Repeat step 5, but this time with a dry cleaning tip or blow dry with
compressed air.
7. Discard the cleaning tips after one use.
Cleaning the Analog Output and External
Trigger Ports
To ensure better performance and higher accuracy, gently wipe the inside
of the analog output and external trigger ports with a lint-free swab dipped
in isopropyl alcohol, then dry using clean compressed air or with a dry
lint-free swab.
C
AUTION
To avoid breaking the detector window during cleaning, be careful
not to apply too much pressure on it.
Maintenance
High-Speed Power Meter 95
Cleaning the Analog Output and External Trigger Ports
5. While applying light pressure, gently rotate the cleaning tip on the
detector window.
6. Repeat step 5, but this time with a dry cleaning tip or blow dry with
compressed air.
7. Discard the cleaning tips after one use.
Cleaning the Analog Output and External
Trigger Ports
To ensure better performance and higher accuracy, gently wipe the inside
of the analog output and external trigger ports with a lint-free swab dipped
in isopropyl alcohol, then dry using clean compressed air or with a dry
lint-free swab.
C
AUTION
To avoid breaking the detector window during cleaning, be careful
not to apply too much pressure on it.