Delta Electronics AC Motor Drive VFD-EL - Manual (Page 60)

Chapter 4 Parameters|
Revision August 2008, 2ELE, V1.02 4-17
Parameter Explanation Settings
Factory
Setting
Customer
0: Disable
08.17 Auto Energy Saving
1: Enable
0
0: AVR function enable
1: AVR function disable
2: AVR function disable for decel.
08.18 AVR Function
3: AVR function disable for stop
0
08.19 Reserved
08.20
Compensation
Coefficient for Motor
Instability 0.0~5.0
0.0
Group 9 Communication Parameters
Parameter Explanation Settings
Factory
Setting
Customer
09.00
Communication
Address
1 to 254 1
0: Baud rate 4800bps
1: Baud rate 9600bps
2: Baud rate 19200bps
09.01 Transmission Speed
3: Baud rate 38400bps
1
0: Warn and keep operating
1: Warn and ramp to stop
2: Warn and coast to stop
09.02
Transmission Fault
Treatment
3: No warning and keep operating
3
09.03 Time-out Detection
0.1 ~ 120.0 seconds
0.0: Disable
0.0
0: 7,N,2 (Modbus, ASCII)
1: 7,E,1 (Modbus, ASCII)
2: 7,O,1 (Modbus, ASCII)
09.04 Communication
Protocol
3: 8,N,2 (Modbus, RTU)
0