Kickback hazard, Warning, Wrong way feed hazard – Sears 113.197611 User Manual
Page 4: Fingers can be pulled into blade, Feed workpiece against blade rotation, Ssfsty, Awarning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Ssfsty
Kickback Hazard
Kickback is the uncontrolled propelling of
the workpiece back toward the user
during ripping.
The cause of kickback is the binding or
pinching of the blade in the workpiece.
Several conditions can cause the blade to
bind or pinch.
When a workpiece kicks back, it could hit
hard enough to cause internal organ in
jury, broken bones, or death.
Read and follow the information and in
structions under ripping safety.
^WARNING
Set hold down,
pawls and spreader.
Stand out of
workpiece path.
Wrong Way Feed Hazard
Wrong way feed is ripping by feeding the
workpiece into the outfeed side of the
blade.
The rotational force of the blade can grab
and pull the workpiece.
Before you can let go or pull back, the
force could pull your hand along with the
workpiece into the blade. Fingers or hand
could be cut off.
The propelled workpiece could hit a by
stander, causing severe impact injury or
death.
Read and follow the information and in
structions under ripping safety.
AWARNING
Wrong Way Feed
Fingers can be
pulled into blade.
Feed workpiece
against blade
rotation.