Attach skirts, Assembly – Sears 113.197611 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assembly
3. Attach spacer between each foot as
sembly and bottom shelf: use one screw
per spacer
(insert screw through foot as
sembly).,
on end of each screw put washer,
then nut, and wrench tighten.
Attach Skirts
1. Set out:
-two skirts
-ten Vi” diam x v^" long truss head
screws
-ten vi"diam lock washers
-ten Vi" diam hex nuts.
2.
Turn cabinet right side up. Attach
skirts, across front and rear of cabinet, to
side panels: use four screws per skirt
(in
sert screws through skirt);
on end of each
screw put washer, then nut, and finger
tighten.
3. Put screw through hole at bottom rear
of right side panel and through raised
edge of bottom shelf. On end of screw
put washer, then nut, and wrench tighten.
Repeat for left side panel.
Front
22