Sears 113.2945 User Manual
Sears, Owners manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- 1. KNOW YOUR POWER TOOL
- 2. GROUND ALL TOOLS
- 3. KEEP GUARDS IN PLACE
- 4. REMOVE ADJUSTING KEYS AND WRENCHES
- 5. KEEP WORK AREA CLEAN
- 6. AVOID DANGEROUS ENVIRONMENT
- 7. KEEP CHILDREN AWAY
- 8. MAKE WORKSHOP KID PROOF
- 9. DON'T FORCE TOOL
- 10. USE RIGHT TOOL
- n. WEAR PROPER APPAREL
- 12. USE SAFETY GLASSES
- 13. SECURE WORK
- 14. DON'T OVERREACH
- 15. MAINTAIN TOOLS IN TOP CONDITION
- 16. DISCONNECT TOOLS
- 17. AVOID ACCIDENTAL STARTING
- 18. USE RECOMMENDED ACCESSORIES
- NO SIGHT
- J;
- REMOVING RADIAL ARM SIDE PLAY
- YOKE CLAMP ARM ADJUSTMENT
- CARRIAGE BEARING ADJUSTMENT
- CONTROLS
- NO LUBRICATION REQUIRED AT THESE POINTS
- PERIODICALLY LUBRICATE THESE POINTS
- PRELIMINARY CROSS-CUT AT THE 0° POSITION
- CROSS-CUTTING
- RIPPING
- RESAWING
- BEVEL AND MITER CUTS
- ROUTING AND DOVETAILING
- BORING
- SANDING
- HELPFUL HINTS
- FOR TROUBLE SHOOTING CHARTS SEE PAGES 18-19
- FOR PARTS LISTS SEE PAGES 20-26
- WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION AS SHOWN ON THIS LIST:
- 1. THE PART NUMBER 3. THE MODEL NUMBER - 113.29450
- 2. THE PART NAME 4. THE NAME OF ITEM - 10-INCH RADIAL ARM SAW
- Always order by Part Number — not by Key Number
- FIGURE 1 PARTS LIST
- FIGURE 4 PARTS LIST
- FIGURE 5 PARTS LIST
- FIGURE 6 PARTS LIST
- POWER TOOL GUARANTEE