Sears 113.197611 - Manual (Page 26)

Assembly
Assemble Drawers
1. Set out:
-two 10" drawers
-two 6" drawers
-two 3" drawers
-six drawer fronts
-forty-eight drawer fasteners.
2. Slide drawer fronts down onto drawers.
3. From inside drawer surface, push
drawer fastener into each hole and into
drawer front.
4. Set drawers aside for installation after
saw has been mounted.
Attach Handwheel
1. Set out:
-handwheel
-#10 X
1
/
2
" long pan head screw
-#10 lock washer
-hex bushing.
2. Put hex bushing into opening in back
of handwheel.
3. Align hex bushing on elevation shaft.
4. Put washer on screw; put screw into
hole in center of handwheel and tighten
with screwdriver.
26