Cisco 3200 - Manual (Page 25)

C H A P T E R
3-1
Cisco TelePresence System 3200
OL-14521-01
3
Mounting and Leveling the Plasma Displays
Revised: September 16, 2009, OL-14521-01
Parts List
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Caution Some system components have metal and plastic edges with hard angles. These edges are exposed until
you complete system assembly. Use caution when you move around the system during assembly to avoid
contact with any exposed system edges.
Note The directions left and right refer to the assembly as you face the Plasma displays.
Key Part Description Part Number Qty Ctn Notes
1 65-inch high-definition display CTS-DISP-65-
GEN2
74-4881-xx
3 23,
24,
25
2 Black buffer strips 700-23981-xx 2 1
Display shelf section: left 95-9692-xx
Kit #
74-5304-xx
1 58 The Display shelves are used in this chapter for
leveling purposes only. The Display shelves and the
attaching bracketing hardware are described in
Chapter 4, “Building the Display Shelf Assembly.”
Display shelf section: center 95-9694-xx
Kit #
74-5306-xx
1 58
Display shelf section: right 95-9693-xx
Kit #
74-5305-xx
1 58
M8 x 20 mm screws 48-2273-01 1