Cisco TELEPRESENCE 1000 - Manual

C H A P T E R
7-1
Cisco TelePresence 1000 Assembly, Use & Care, and Field-Replaceable Unit Guide
OL-16247-01
7
Use & Care Guide
Revised: March 5, 2009, OL-16247-01
Cleaning the Plasma Display
Per industry-standard best practice recommendations for cleaning the plasma display:
The plasma displays require special consideration when cleaning. Wipe the panel surface gently using
only a cleaning cloth or a soft, lint-free cloth. If the surface is particularly dirty, wipe with a soft, lint-free
cloth which has been soaked in pure water or water to which a small amount of neutral detergent has
been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.
Cleaning the Camera Lens
Caution Do not touch the camera after installation is completed. If you need to clean the camera lens, use a dry
microfiber cloth. After cleaning, you will need to realign the camera.