Cleaning the camera lens, Maintaining the projector – Cisco 3200 User Manual
Page 208
11-2
Cisco TelePresence System 3200
OL-14521-01
Chapter 11 Use & Care Guide
Cleaning the Camera lens
Cleaning the Camera lens
Caution
Do not touch the camera after installation is completed. If you need to clean the camera lens, use a dry
microfiber cloth. After cleaning, you will need to realign the camera.
Maintaining the Projector
Note
Refer to the Projector User Guide included with your projector for maintenance issues such as cleaning
the projector lens. To replace the projector lamp, see the
“Replacing the Projector Lamp” section on
. To replace the projector, see the
“Replacing the Projector—Part Number
CTS-PRJTR-GEN1=” section on page 12-27
.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Installation of the equipment must comply with local and national electrical codes.