Potter PFC-6075R - Manual (Page 91)

5-85
PFC-6075R • 5403594 • REV D • 9/14
To configure a range of points:
1. Click the first point to configure from the “Function” field.
2. Press and hold the SHIFT key, then click in “Function” field of last point.
Figure 112. Example of Configuring a “Range” of Points
3. Right-click from “Function” field to display configuration options.
Note: If you right-click outside of “Function” field, the range is deselected, and only one (1) device will be configured.
4. Click on device type from shortcut menu.
5. Continue configuring other points, as needed.
To configure a group of selective points:
1. Click the first point in “Function” field to configure.
2. Press and hold the CTRL key, then click selective points (from “Function” field).
Figure 113. Example of Configuring “Multiple” Selective Points
3. Right-click from “Function” field to display configuration options.
Note: If you select points or right-click outside of “Function” field, the points are deselected, and only one (1) device will be
configured.