Potter PFC-6075R - Manual (Page 103)

5-97
PFC-6075R • 5403594 • REV D • 9/14
Fire Communications Board (FCB-1000)
The panel supports one (1) FCB-1000. The FCB-1000 provides a remotely-located IP connection into the panel, which may be
designated as the IP reporting device versus passing through the on-board internet connection.
To add and configure the FCB-1000 board:
1. Select FCB-1000 from the system panel.
2. Click the Add Device button. The “Add Device” window displays.
Figure 137. Example of Add FCB-1000 Window
3. Double-click in the “Name” field to customize name.
4. Double-click in “Address” field to adjust address, if needed.
5. Click the plus sign located in the left-most column to display the "Network Settings" options.
Figure 138. Example of the FCB-1000 Network Settings Window
6. Set the IP address by choosing one of the following two methods:
• The built in DHCP (Dynamic Host Configuration Protocol) option is the default; an IP address is automatically requested
from the “Host Computer".
• The Network Administrator or Installer may set the IP address using the software's Static IP function.
7. Click the minus sign located in the left-most column to suppress the "Network Settings" options from the window.