Potter PFC-6075R User Manual
Page 120
6-114
PFC-6075R • 5403594 • REV D • 9/14
PSN-1000/PSN-1000(E) Programming
The panel can be programmed to support up to thirty-one (31) PSN-1000/PSN-1000(E) Power Expanders. Each power supply
provides six (6) NAC circuits (3A max), and two (2) dry contact input circuits. Both Class A and B configurations are supported;
however, Class A requires that NAC circuits are paired as follows: NAC 1&2, NAC 3&4 and NAC 5&6, thus providing three (3)
Class A circuits.
Adding a Power Supply
To add and configure a power supply:
1. Select the Power Supply function from the system panel. The "Add Device" window displays.
Figure 158. Example of Add Power Supply Window
2. Click the Add Device button to create a new power supply.
Figure 159. Example of Add Power Supply Window
3. Configure the power supply, as needed:
y
Double-click in the “Name” field to change the default name.
y
Double-click in the “Address” field to enter a different address.
y
Click on the "Class" drop-down arrow to select Class A for the repeated P-Link circuit.
Figure 160. Example of Power Supply "Class for P-Link" Operation
Power Supply
default name.
Click here to select
Class "A" for the
repeated P-Link circuit.