Potter PFC-6075R - Manual (Page 115)

6-109
PFC-6075R • 5403594 • REV D • 9/14
Figure 150. PSN-1000 / PSN-1000 (E) Class A NAC Wiring Example
PSN-1000/PSN1000(E) as Releasing Device Circuit
The releasing device circuit is typically a NAC programmed to control a releasing device, such as a solenoid or squib. Any of the
PSN-1000/PSN-1000(E) NACs may be programmed as a releasing circuit. All are fully supervised and power limited.
Figure 151. PSN-1000 / PSN-1000 (E) Releasing Circuit Wiring Example
Note: When a PSN-1000/PSN-1000(E) is configured as a releasing circuit, the End of Line Diode (EOLD) assembly
must be installed. The Potter EOLD part number is 3005012; it must be installed in accordance with the installation
manual.
DWG #594-16
- I1 + - NAC 1 + - NAC 5 + - NAC 3 +
-
+ A B
- I2 + - NAC 2 + - NAC 4 + - NAC 6 +
-
+ A B
P-LINK
Releasing
Device
End of line device
5.1k ohm 1/2W
Part #3005012
Note:
EOL Device shall be installed in the same
electrical enclosure as the releasing device.
DWG #602-25
- I1 + - NAC 1 + - NAC 5 + - NAC 3 +
-
+ A B
Notification
Appliance
- I2 + - NAC 2 + - NAC 4 + - NAC 6 +
-
+ A B
P-LINK