Potter PFC-6075R - Manual (Page 79)

5-73
PFC-6075R • 5403594 • REV D • 9/14
Job Details display here
Receiving E-mail Status Reports
When a system status (Alarm, Supervisory, Trouble events) e-mail is received, the body of the e-mail contains the information
entered in the “Job Details” section of the software (as shown below). If nothing is entered in the software, the body of the e-mail
will only indicate the events that occurred. The events are listed after the “Job Details” information. They are formatted with a
date/time stamp showing when the event occurred, event type, and the event description or the point information.
Figure 96. Example of Job Details in System Status E-mail
When a history or detector (sensitivity) status e-mail is received it contains two attachments:
• A text file (.txt)
• A comma separated values (.csv) file
Figure 97. Example of a Detector "Sensitivity" Status text file (.txt)
System e-mail communications and functions are intended for informational reporting purposes only. They are intended to be used as a
convenience function. E-mail communications should NOT be used as a primary means of reporting emergency information.
Refer to Table 17 – Zone Attributes
in this Section for an explanation of
Day/Night Sensitivity settings.