Potter PFC-6075R - Manual (Page 105)

5-99
PFC-6075R • 5403594 • REV D • 9/14
Fiber Interface Bridge (FIB-1000)
The panel supports thirty (30) FIB-1000s. This optional board allows the standard 4-wire P-Link bus to be converted to and/or
from fiber optic cable.
To add and configure the FIB-1000 Bridge:
1. Select FIB-1000 from the system panel.
2. Click the Add Device button. The “FIB-1000 Add Device” window displays.
Figure 140. Example of the Add FIB-1000 Window
3. Double-click in the “Name” field to customize name.
4. Double-click in “Address” field to adjust address, if needed.
5. Click in the "Class A" selection box, if applicable.
6. Repeat steps, as needed, to continue adding and configuring FIB-1000s.