Showing handset screen on other devices, Connectivity, Using wireless output – Sharp AQUOS Crystal User Manual
Page 173: Wireless output operations
171
Connectivity
AQUOS CRYSTAL
Showing Handset Screen on Other
Devices
View the same content output from handset screen on another
device (mirroring). Enjoy handset photos and videos on the
larger screen of a TV, etc.
Using Wireless Output
Connect handset and a nearby Wi-Fi Direct-compatible device
by Wi-Fi without an intermediate access point.
・Depending on handset application, handset screen may not
appear on connected device.
In app sheet,
(Settings)
Other settings
Network settings
Wireless output(Miracast)
Wireless output window opens.
・If confirmation appears, follow onscreen prompts.
on Action Bar
Wireless output is enabled (
).
・If Wi-Fi settings are OFF, they are turned ON.
・Handset scans for nearby devices, and names of available
Wi-Fi Direct-compatible devices appear.
・To disable wireless output, Tap
(
).
Tap other devices
After authenticating, the same content as on handset
screen appears on other devices.
・Authenticated devices are registered to handset, allowing an
easier next connection.
・If a call arrives or battery runs low during wireless output,
handset is disconnected.
Operate handset for screen to show on other devices
Screen on other devices change according to handset
screen.
Wireless Output Operations
Wirelessly Outputting to Previously-Connected
Devices
Available when Wireless output is ON.
Tap device to connect to in Wireless output window
Setting Authentication Method
In Wireless window,
Authentication method
Push-button method
/
PIN method
/
DISPLAY
method
Enabling/Disabling Handset Screen to Turn Off
during Wireless Output
In Wireless output window,
Keep the screen on
・Tap
Keep the screen on
to toggle on (
)/off (
).
・If handset screen turns off during wireless output,
nothing appears on other device screens.
Viewing Help
In Wireless output window,
Help