Interlogix NS3502-8P-2S User Manual - Manual (Page 83)

IFS NS3502-8P-2S User Manual
83
Use the SNMP Menu to display or configure the Managed Switch's SNMP function. This section has the
following items:
 System Configuration Configure SNMP on this page.
 System Information The system information is provides here.
 SNMPv3 Communities
Configure SNMPv3 communities table on
this page.
 SNMPv3 Users Configure SNMPv3 users table on this page.
 SNMPv3 Groups
Configure SNMPv3 groups table on this
page.
 SNMPv3 Views
Configure SNMPv3 views table on this
page.
 SNMPv3 Accesses
Configure SNMPv3 accesses table on this
page.
4.3.2 SNMP System Configuration
Configure SNMP on this page. The SNMP System Configuration screen in Figure 4-3-1 appears.
Figure 4-3-1: SNMP System Configuration page screenshot
The page includes the following fields:
Object Description
• Mode Indicates the SNMP mode operation. Possible modes are:
Enabled: Enable SNMP mode operation.
Disabled: Disable SNMP mode operation.
• Version Indicates the SNMP supported version. Possible versions are:
SNMP v1: Set SNMP supported version 1.
SNMP v2c: Set SNMP supported version 2c.
SNMP v3: Set SNMP supported version 3.
• Read Community Indicates the community read access string to permit access to
SNMP agent. The allowed string length is 0 to 255, and the