Interlogix NS3502-8P-2S User Manual - Manual (Page 50)

IFS NS3502-8P-2S User Manual
50
4.2 System
Use the System menu items to display and configure basic administrative details of the Managed
Switch. Under System the following topics are provided to configure and view the system information:
This section has the following items:
■
System Information The switch system information is provided here.
■ IP Configuration Configure the switch-managed IP information on this page.
■ IPv6 Configuration Configure the switch-managed IPv6 information on this page.
■ Users Configuration This page provides an overview of the current users. Currently
the only way to login as another user on the web server is to
close and reopen the browser.
■
Privilege Levels This page provides an overview of the privilege levels.
■
NTP Configuration Configure NTP on this page.
■ UPnP Configure UPnP on this page.
■ DHCP Relay Configure DHCP Relay on this page.
■ DHCP Relay Statistics This page provides statistics for DHCP relay.
■ CPU Load This page displays the CPU load, using a SVG graph.
■ System Log The switch system log information is provided here.
■
Detailed Log The switch system detailed log information is provided here.
■
Remote Syslog Configure remote syslog on this page.
■ LED Power Reduction Configuration LED power reduction on this page.
■ EEE Power Reduction Configuration energy efficient ethernet power reduction on
this page
■ Thermal Protection Configure thermal protection on this page.
■ Web Firmware
Upgrade This page facilitates an update of the firmware controlling the
switch.
■
TFTP Firmware
Upgrade Upgrade the firmware via TFTP server
■ Configuration Backup You can save the switch configuration. The configuration file
is in XML format with a hierarchy of tags.
■ Configuration Upload You can load the switch configuration. The configuration file
is in XML format with a hierarchy of tags.
■
Image Select Configuration active or alternate firmware on this page.
■ Factory Default You can reset the configuration of the stack switch on this
page. Only the IP configuration is retained.
■ System Reboot You can restart the stack switch on this page. After restart,
the stack switch will boot normally.