Interlogix NS3502-8P-2S User Manual - Manual (Page 385)

IFS NS3502-8P-2S User Manual
385
Set or show Auth method. (default: Show Auth method).
Syntax:
Security Switch Auth Method [console|telnet|ssh|web] [none|local|radius|tacacs+]
[enable|disable]
Parameters:
console : Settings for console
telnet : Settings for telnet
ssh : Settings for ssh
web : Settings for web
(default: Set or show the specific client authentication method)
none : Authentication disabled
local : Use local authentication
radius : Use remote RADIUS authentication
tacacs+ : Use remote TACACS+ authentication
(default: Show client authentication method)
enable : Enable local authentication if remote authentication fails
disable : Disable local authentication if remote authentication fails
(The parameter is effective when it is typed)
Default Setting:
disable
Example:
Use RADIUS authentication method for telnet.
NS3502-8P-2S:/>security switch auth method telnet radius enable
Security Switch SSH Configuration
Description:
Show SSH configuration.
Syntax:
Security Switch SSH Configuration
Example:
Show SSH configuration.
NS3502-8P-2S:/>security switch ssh configuration