Interlogix NS3502-8P-2S User Manual - Manual (Page 469)

IFS NS3502-8P-2S User Manual
469
LLDP Mode
Description:
Set or show LLDP mode.
Syntax:
LLDP Mode [] [enable|disable|rx|tx]
Parameters:
: Port list or 'all', default: All ports
enable : Enable LLDP reception and transmission
disable: Disable LLDP
rx : Enable LLDP reception only
tx : Enable LLDP transmission only
(default: Show LLDP mode)
Default Setting:
disable
Example:
Enable port1 LLDP function.
NS3502-8P-2S:/>lldp mode 1 enable
LLDP Optional TLV
Description:
Show or Set LLDP Optional TLVs.
Syntax:
LLDP Optional_TLV [] [port_descr|sys_name|sys_descr|sys_capa|mgmt_addr]
[enable|disable]
Parameters:
: Port list or 'all', default: All ports
port_descr : Description of the port
sysm_name : System name
sys_descr : Description of the system
sys_capa : System capabilities
mgmt_addr : Master's IP address
(default: Show optional TLV's configuration)
enable : Enables TLV