Interlogix NS3502-8P-2S User Manual - Manual (Page 492)

IFS NS3502-8P-2S User Manual
492
QoS Port Classification Map [] [] [] [] []
Parameters:
: Port list or 'all', default: All ports
: PCP list or 'all', default: All PCPs (0-7)
: DEI list or 'all', default: All DEIs (0-1)
: QoS class (0-7)
: Drop Precedence Level (0-1)
QoS Port Classification DSCP
Description:
Set or show if the classification is based on DSCP value in IP frames.
Syntax:
QoS Port Classification DSCP [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable DSCP based classification
disable : Disable DSCP based classification
(default: Show DSCP based classification mode)
Default Setting:
disable
Example:
Enable QoS port classification DSCP.
NS3502-8P-2S:/>qos Port Classification dscp 1-10 enable
QoS Port Policer Mode
Description:
Set or show the port policer mode
Syntax:
QoS Port Policer Mode [] [enable|disable]
Parameters: