Interlogix NS3502-8P-2S User Manual - Manual (Page 194)

IFS NS3502-8P-2S User Manual
194
Figure 4-9-9: QoS Port DSCP Configuration page screenshot
The page includes the following fields:
Object Description
• Port The Port column shows the list of ports for which you can
configure dscp ingress and egress settings.
• Ingress In Ingress settings you can change ingress translation and
classification settings for individual ports.
There are two configuration parameters available in Ingress:
 Translate
 Classify
• Translate To Enable the Ingress Translation click the checkbox.
• Classify Classification for a port has 4 different values.
 Disable: No Ingress DSCP Classification.
 DSCP=0: Classify if incoming (or translated if enabled) DSCP
is 0.
 Selected: Classify only selected DSCP for which
classification is enabled as specified in DSCP Translation
window for the specific DSCP.
 All: Classify all DSCP.
• Egress Port Egress Rewriting can be one of -
 Disable: No Egress rewrite.
 Enable: Rewrite enable without remapped.
 Remap: DSCP from analyzer is remapped and frame is