Interlogix NS3502-8P-2S User Manual - Manual (Page 314)

IFS NS3502-8P-2S User Manual
314
Object Description
• Local Port The port on which the LLDP frame was received.
• Chassis ID The Chassis ID is the identification of the neighbor's LLDP frames.
• Remote Port ID The Remote Port ID is the identification of the neighbor port.
• System Name System Name is the name advertised by the neighbor unit.
• Port Description Port Description is the port description advertised by the
neighbor unit.
• System Capabilities System Capabilities describes the neighbor unit's capabilities. The
possible capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If
the capability is disabled, the capability is followed by (-).
• Management
Address
Management Address is the neighbor unit's address that is used
for higher layer entities to assist the discovery by the network
management. This could for instance hold the neighbor's IP
address.
Buttons
: Click to refresh the page immediately.
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.