4 cable diagnostics – Interlogix NS3502-8P-2S User Manual User Manual
Page 322
IFS NS3502-8P-2S User Manual
322
•
Ping Size
The payload size of the ICMP packet. Values range from 8 bytes
to 1400 bytes.
•
Result
Display the ping result.
4.15.4 Cable Diagnostics
This page is used for running the Cable Diagnostics.
Press to run the diagnostics. This will take approximately 5 seconds. If all ports are selected, this can
take approximately 15 seconds. When completed, the page refreshes automatically, and you can view
the cable diagnostics results in the cable status table. Note that Cable Diagnostics is only accurate for
cables of length 7 - 140 meters.
10 and 100 Mbps ports will be linked down while running cable diagnostic. Therefore, running cable
diagnostic on a 10 or 100 Mbps management port will cause the switch to stop responding until
VeriPHY is complete. The ports belong to the currently selected stack unit, as reflected by the page
header. The VeriPHY Cable Diagnostics screen in
Figure 4-15-4
appears.
Figure 4-15-4: VeriPHY Cable Diagnostics page screenshot
The page includes the following fields:
Object
Description
•
Port
The port where you are requesting Cable Diagnostics.