Interlogix NS3502-8P-2S User Manual - Manual (Page 139)

IFS NS3502-8P-2S User Manual
139
4.6.13 Protocol-based VLAN
This page allows you to add new protocols to Group Name (unique for each Group), mapping entries as
well as allowing you to see and delete already mapped entries for the switch. The Protocol-based VLAN
screen in
Figure 4-6-19 appears.
Figure 4-6-19: Protocol to Group Mapping Table page screenshot
The page includes the following fields:
Object Description
• Delete To delete a Protocol to Group Name map entry, check this box.
The entry will be deleted on the switch during the next Save.
• Frame Type Frame Type can have one of the following values:
1. Ethernet
2. LLC
3. SNAP
Note: On changing the Frame type field, valid value of the
following text field will vary depending on the new frame type
you selected.
• Value Valid value that can be entered in this text field depends on the
option selected from the preceding Frame Type selection menu.
Below is the criteria for three different Frame Types:
1. For Ethernet: Values in the text field when Ethernet is
selected as a Frame Type is called etype. Valid values for
etype ranges from 0x0600-0xffff
2. For LLC: Valid value in this case is comprised of two
different sub-values.
a. DSAP: 1-byte long string (0x00-0xff)
b. SSAP: 1-byte long string (0x00-0xff)