Interlogix NS3502-8P-2S User Manual - Manual (Page 502)

IFS NS3502-8P-2S User Manual
502
DSCP value used to map QoS class and DPL is either translated DSCP value or incoming frame
DSCP value.
Syntax:
QoS DSCP Map [] [] []
Parameters:
: DSCP (0-63, BE, CS1-CS7, EF or AF11-AF43) list or 'all'
(default: Show DSCP ingress map table i.e. DSCP->(class, DPL))
: QoS class (0-7)
: Drop Precedence Level (0-1)
QoS DSCP Translation
Description:
Set or show global ingress DSCP translation table.
If port DSCP translation is enabled, translation table is used to translate incoming frames DSCP
value and translated value is used to map QoS class and DP level.
Syntax:
QoS DSCP Translation [] []
Parameters:
: DSCP (0-63, BE, CS1-CS7, EF or AF11-AF43) list or 'all'
(default: Show DSCP translation table)
: Translated DSCP: 0-63, BE, CS1-CS7, EF or AF11-AF43
QoS DSCP Trust
Description:
Set or show trusted DSCP value which is used for QoS classification.
The DSCP value to be checked for trust is either translated value ifDSCP translation is enabled for
the ingress port or incoming frame DSCPvalue if translation is disabled for the port. Trusted
DSCP value is onlyused for QoS classification.
Syntax:
QoS DSCP Trust [] [enable|disable]
Parameters:
: DSCP (0-63, BE, CS1-CS7, EF or AF11-AF43) list or 'all'
enable : Set DSCP as trusted DSCP