Interlogix NS3502-8P-2S User Manual User Manual
Page 220

IFS NS3502-8P-2S User Manual
220
length (PLN) settings.
0
: ARP/RARP frames where the HLN is equal to Ethernet (0x06)
and the (PLN) is equal to IPv4 (0x04).
1
: ARP/RARP frames where the HLN is equal to Ethernet (0x06)
and the (PLN) is equal to IPv4 (0x04).
Any
: Any value is allowed ("don't-care").
• IP
Specify whether frames can hit the action according to their
ARP/RARP hardware address space (HRD) settings.
0
: ARP/RARP frames where the HLD is equal to Ethernet (1).
1
: ARP/RARP frames where the HLD is equal to Ethernet (1).
Any
: Any value is allowed ("don't-care").
• Ethernet
Specify whether frames can hit the action according to their
ARP/RARP protocol address space (PRO) settings.
0
: ARP/RARP frames where the PRO is equal to IP (0x800).
1
: ARP/RARP frames where the PRO is equal to IP (0x800).
Any
: Any value is allowed ("don't-care").
IP Parameters
The IP parameters can be configured when Frame Type "IPv4" is selected.
Object
Description
•
IP Protocol Filter
Specify the IP protocol filter for this ACE.
Any
: No IP protocol filter is specified ("don't-care").
Specific
: If you want to filter a specific IP protocol filter with this
ACE, choose this value. A field for entering an IP protocol filter
appears.
ICMP
: Select ICMP to filter IPv4 ICMP protocol frames. Extra
fields for defining ICMP parameters will appear. These fields are
explained later in this help file.
UDP
: Select UDP to filter IPv4 UDP protocol frames. Extra fields
for defining UDP parameters will appear. These fields are
explained later in this help file.
TCP
: Select TCP to filter IPv4 TCP protocol frames. Extra fields
for defining TCP parameters will appear. These fields are
explained later in this help file.
• IP Protocol Value
When "Specific" is selected for the IP protocol value, you can
enter a specific value. The allowed range is 0 to 255. A frame
that hits this ACE matches this IP protocol value.
• IP TTL
Specify the Time-to-Live settings for this ACE.
Zero
: IPv4 frames with a Time-to-Live field greater than zero
must not be able to match this entry.