Interlogix NS3502-8P-2S User Manual - Manual (Page 125)

IFS NS3502-8P-2S User Manual
125
(selection shall be allowed by a Combo Box). When ALL VLAN
Users is selected, it shall show this information for all the VLAN
Users, and this is the default. VLAN membership allows the
frames Classified to the VLAN ID to be forwarded to the
respective VLAN member ports.
• VLAN User A VLAN User is a module that uses services of the VLAN
management functionality to configure VLAN memberships and
VLAN port configuration such as PVID, UVID. Currently we
support following VLAN :
-
CLI/Web/SNMP: This is referred as static.
-
NAS: NAS provides port-based authentication, which involves
communications between a Supplicant, Authenticator, and an
Authentication Server.
-
Voice VLAN: Voice VLAN is a VLAN configured specially for
voice traffic typically originating from IP phones.
-
MVR: MVR is used to eliminate the need to duplicate multicast
traffic for subscribers in each VLAN. Multicast traffic for all
channels is sent only on a single (multicast) VLAN.
-
MSTP: The 802.1s Multiple Spanning Tree protocol (MSTP)
uses VLANs to create multiple spanning trees in a network,
which significantly improves network resource utilization
while maintaining a loop-free environment.
Buttons
: Select VLAN Users from this drop down list.
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
: Updates the table starting from the first entry in the VLAN Table, i.e. the entry with the lowest
VLAN ID.
: Updates the table, starting with the entry after the last entry currently displayed.