Interlogix NS3502-8P-2S User Manual - Manual (Page 501)

IFS NS3502-8P-2S User Manual
501
none
Example:
Set DSCP classification based on QoS class and DP level in zero
NS3502-8P-2S:/> QoS Port DSCP Classification 1-10 zero
QoS Port DSCP EgressRemark
Description:
Set or show the port DSCP remarking mode.
Syntax:
QoS Port DSCP EgressRemark []
[disable|enable|remap_dp_unaware|remap_dp_aware]
Parameters:
: Port list or 'all', default: All ports
disable : Disable DSCP egress rewrite
enable : Enable DSCP egress rewrite with the value received from analyzer
remap_dp_unaware : Rewrite DSCP in egress frame with remapped DSCP where remap is DP
unaware or DP = 0
remap_dp_aware : Rewrite DSCP in egress frame with remapped DSCP where remap is DP
aware and DP = 1
(default: Show port DSCP egress remarking mode)
Default Setting:
disable
Example:
Enable DSCP egress rewrite
NS3502-8P-2S:/> QoS Port DSCP EgressRemark 1-10 enable
QoS DSCP Map
Description:
Set or show DSCP mapping table.
This table is used to map QoS class and DP level based on DSCP value.