Interlogix NS3502-8P-2S User Manual - Manual (Page 170)

IFS NS3502-8P-2S User Manual
170
join report is forwarded as normal. If a requested multicast group is denied, the IGMP join report is
dropped.
IGMP throttling sets a maximum number of multicast groups that a port can join at the same time.
When the maximum number of groups is reached on a port, the switch can take one of two actions;
either “deny” or “replace”. If the action is set to deny, any new IGMP join reports will be dropped. If
the action is set to replace, the switch randomly removes an existing group and replaces it with the
new multicast group. The IGMP Snooping Port Group Filtering Configuration screen in
Figure 4-8-7
appears.
Figure 4-8-7: IGMP Snooping Port Group Filtering Configuration page screenshot
The page includes the following fields:
Object Description
• Delete Check to delete the entry. It will be deleted during the next save.
• Port The logical port for the settings.
• Filtering Group The IP Multicast Group that will be filtered.
Buttons
: Click to add a new entry to the Group Filtering table.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.8.5 IGMP Snooping Status
This page provides IGMP Snooping status. The IGMP Snooping Status screen in Figure 4-8-8 appears.