Interlogix NS3502-8P-2S User Manual - Manual (Page 180)

IFS NS3502-8P-2S User Manual
180
4.8.13 MLDv2 Information
Entries in the MLD SSM Information Table are shown on this page. The MLD SSM Information Table is
sorted first by VLAN ID, then by group, and then by Port No. Different source addresses belong to the
same group are treated as single entry.
Each page shows up to 64 entries from the MLD SSM (Source Specific Multicast) Information table,
default being 20, selected through the "entries per page" input field. When first visited, the web page
will show the first 20 entries from the beginning of the MLD SSM Information Table.’
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD
SSM Information Table. The MLDv2 Information screen in
Figure 4-8-16 appears.
Figure 4-8-16: MLD SSM Information page screenshot
The page includes the following fields:
Object Description
• VLAN ID VLAN ID of the group.
• Group Group address of the group displayed.
• Port Switch port number.
• Mode Indicates the filtering mode maintained per (VLAN ID, port
number, Group Address) basis. It can be either Include or
Exclude.
• Source Address IP Address of the source. Currently, system limits the total
number of IP source addresses for filtering to be 128.
• Type Indicates the Type. It can be either Allow or Deny.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
: Updates the table, starting with the first entry in the IGMP Group Table.
: Updates the table, starting with the entry after the last entry currently displayed.