Interlogix NS3502-8P-2S User Manual - Manual (Page 455)

IFS NS3502-8P-2S User Manual
455
Syntax:
STP Msti Add
Parameters:
: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
: VLAN ID (1-4095)
Example:
Add MST1 in vlan1.
NS3502-8P-2S:/>stp msti add 1 1
STP Port Configuration
Description:
Show STP Port configuration.
Syntax:
STP Port Configuration []
Parameters:
: Port list or 'all'. Port zero means aggregations.
Example:
Show STP status of Port1
NS3502-8P-2S:/>stp port configuration 1
Port Mode AdminEdge AutoEdge restrRole restrTcn Point2point
---- -------- ------------------ ------------------ -----------
1 Disabled Disabled Enabled Disabled Disabled Auto
STP Port Mode
Description:
Set or show the STP enabling for a port.
Syntax:
STP Port Mode [] [enable|disable]