Interlogix NS3502-8P-2S User Manual - Manual (Page 390)

IFS NS3502-8P-2S User Manual
390
Syntax:
Security Switch Access Mode [enable|disable]
Parameters:
Enable: Enable access management
Disable: Disable access management
(Default: Show access management mode)
Default Setting:
Disable
Example:
Enable switch access mode
NS3502-8P-2S:/>security switch access mode enable
Security Switch Access Add
Description:
Add access management entry, default: Add all supported protocols.
Syntax:
Security Switch Access Add [web] [snmp] [telnet]
Parameters:
: entry index (1-16)
: Start IP address (a.b.c.d)
: End IP address (a.b.c.d)
web : Indicates that the host can access the switch from HTTP/HTTPS
snmp : Indicates that the host can access the switch from SNMP
telnet : Indicates that the host can access the switch from TELNET/SSH
Example:
Add access management list from 192.168.0.1 to 192.168.0.200 via web interface.
NS3502-8P-2S:/>security switch access add 1 192.168.0.1 192.168.0.200 web
Security Switch Access IPv6 Add
Description: